Panasonic KX-TVM50 Installation Manual page 94

4.1.3 APT/DPT Integration Features
Feature
Remote Call Forwarding
Set
Time Synchronisation
Timed Reminder Setting
VM Menu
*3
DID Call Routing and Toll Saver using DID numbers are only available when the VPS is connected to the following PBXs with DPT
*1
Integration.
•
KX-TD500, software production date code 040901 or later.
(KX-TD500C: Q951AB or higher, KX-TD500RU: Q971AB or higher, all other: Q271AD or higher)
•
KX-TDE series
•
KX-TDA series, MPR version 1.1 or higher
*2 When an incoming trunk call reaches the VPS via the PBX, the VPS will wait about 5 s before answering the call in order to properly
receive the Caller ID information from the PBX. This waiting time is determined by the "Waiting Time for Receiving Caller ID" setting
(see 2.4.3 Parameters in the Programming Manual).
*3 Available when the VPS is connected to a KX-TDE series PBX or a KX-TDA series PBX (MPR version 2.21 or higher).
94 Installation Manual
The subscribers and the Message Manager can program
their extensions from a remote location to forward various
types of calls to a desired extension or an outside tele-
phone.
Whenever the PBX sets a new date and time or when DPT
Integration is established, the data is automatically regis-
tered in the VPS.
Allows subscribers to set the Timed Reminder feature of
*3
the PBX using voice prompts.
Allows subscribers to access subscriber services by nav-
igating through menus shown on their Digital Proprietary
Telephones (DPTs).
Description
Compatible Integra-
tion Type
APT DPT
— ü
— ü
— ü
— ü
Document Version 2.1 2008/04