Toro Vista 08924 Vista 08924TC Operator's Manual page 11

Accelerator Pedal
Use the accelerator pedal to vary ground speed
of the machine. Pressing down the accelerator
pedal starts the machine. Pressing the pedal farther
increases ground speed. Releasing the pedal slows
the machine, and the machine shuts off.
The forward speed in performance mode is 26 km/h
(16 mph).
The forward speed in economy mode is 18 km/h (11
mph).
Brake Pedal
Use the brake pedal to stop or slow the machine.
WARNING
Operating a machine with worn or incorrectly
adjusted brakes can result in personal injury.
If the brake pedal travels within 25 mm (1
inch) of the machine floor board, adjust or
repair the brakes.
Direction Selector
The direction selector
F and R
ORWARD EVERSE
Note:
The machine can be on in any of the 2
positions, but only moves in the F
R positions.
EVERSE
(Figure 4) has 2 positions:
.
and
ORWARD
Horn Switch
Press the horn switch
Light Switch
Use the light switch
headlights. Push the light switch up to turn on the
headlights. Push the light switch down to turn off the
lights.
USB Port
Use the USB port (Figure
Important:
When you are not using the USB port,
insert the rubber plug to prevent damage to the
port.
Key Switch
Use the key switch
machine or put the machine into T
The key switch has 3 positions: O
T .
RANSPORT
Rotate the key clockwise to the O
the machine.
When you stop the machine, rotate the key
counterclockwise to the O
machine. Remove the key whenever you leave the
machine.
To disengage the parking brake, rotate and hold
the key switch in place for 5 seconds to enter the
T position.
RANSPORT
11
(Figure 4) to sound the horn.
(Figure 4) to illuminate the
4) to power mobile devices.
(Figure 4) to run and shut off the
RANSPORT
, O , and
N FF
position to operate
N
position to shut off the
FF
mode.