Locating The Fuses; Replacing The Headlight - Toro Vista 08924 Vista 08924TC Operator's Manual

Locating the Fuses

The 12 V and 60 V fuses are located under the hood
(Figure 32).
Figure 32
1. USB (5 A)
2. Headlights (10 A)
3. Alarm (5 A)
4. Telematics power (5 A)
The battery charger (30 A) and machine power
(200 A) fuses are located under the removable seat
assembly (Figure 33).
Figure 33
1. Machine-power fuse (200
A)
g408771
5. Horn (20 A)
6. Display (10 A)
7. Main system B+ (10 A)
8. DC to DC converter (20 A)
g411988
2. Battery-charger fuse (30
A)

Replacing the Headlight

Specification: See your Parts Catalog.
1. Disconnect the battery; refer to
Battery-Disconnect Switch (page
2. Remove the hood.
3. Disconnect the wire-harness connector from the
headlight connector
1. Headlight
2. Screw
4. Remove the screws that secure the headlight to
the hood.
Note:
Retain all parts for installation of the new
headlight.
5. Remove the old headlight and use the screws to
secure the new headlight to the hood.
Torque the screws to 1 N∙m (9 in-lb).
6. Connect the wire-harness connector to the
headlight connector
34
Using the
33).
(Figure 34).
Figure 34
3. Wire-harness connector
(Figure 34).
g411791