Table of Contents
Advertisement
1.
Plug the power-supply cord into the machine
charger outlet
(Figure
WARNING
A damaged charger cord can cause an
electrical shock or a fire.
Thoroughly inspect the power supply
cord before using the charger. If the cord
is damaged, do not operate the charger
until you obtain a replacement.
Figure 18
1. Charger outlet
2.
Insert the wall plug end of the power-supply cord
into a grounded electrical outlet.
18).
g411210
Charging the Lithium-Ion Batteries
CAUTION
Attempting to charge the batteries with a
charger not provided by Toro can result in
excessive heat and other related product
malfunctions, which can lead to property
damage and/or injury.
Use the Toro-provided chargers to charge the
batteries.
Recommended temperature range for charging:
0° to 45°C (32° to 113°F)
Important:
Charge the batteries only in
temperatures that are within the recommended
range.
Note:
The charger will not function in temperatures
exceeding the minimum or maximum temperatures.
The hot or cold battery indicators will appear on the
display.
The charging status is shown on the display.
If there is a fault, an error message will appear in
the display. To correct an error, refer to the machine
Service Manual.
Completing the Charging Process
1.
Remove the power-supply cord from the
machine charger outlet.
2.
Place the cord in a storage position that avoids
damage.
3.
Turn on the machine.
4.
Verify the charge level; refer to
12).
23
Display (page
Advertisement
Table of Contents
