Specifications; Intended Use; Cutting Masonry/Metal - Bosch PROFACTOR GCM18V-10SDN14 Operating/Safety Instructions Manual

Use this miter saw only as intend-
ed. Unintended use may result in per-
sonal injury and property damage.
This product is intended to cut wood,
wood-like products, and non-ferrous
metals. Dust build-up around the lower guard and hub from
other materials (masonry or ferrous metal) may disable the
lower guard operation.

Cutting Masonry/Metal

Do not cut ferrous metal or mason-
ry with this miter saw. The dust
from the ferrous metal or masonry cutting will cause the lower
guard to become sluggish and may not close fully and quickly
after cutting these materials.
Do not use abrasive wheels. This
tool is not intended for usage with
metal or masonry cut-off wheels.

Specifications

GCM18V-10SD Cordless Miter Saw
Voltage: 18 V
Allowed ambient temperature:
– during charging
– during operation
– during storage
Battery Packs/Chargers
Please refer to the battery/charger list, included with your tool.

Intended Use

-14-
32...113 °F (0...+45 °C)
-4...122 °F (-20...+50 °C)
32...122 °F (0...+50 °C)
Do not use Wet Diamond cutting
off wheel or water feed devices
with this miter saw. Masonry cutting waste will enter the
lower guard system, harden and cause the guard to become
inoperable. Use of water in masonry cutting applications with
an electric miter saw will cause electric shock hazards.
This tool is not intended for usage with metal or masonry cut-
off wheels.