Additional Safety Rules - Bosch PROFACTOR GCM18V-10SDN14 Operating/Safety Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

GFCI and personal protection devices like electrician's
rubber gloves and footwear will further enhance your per-
sonal safety.
Do not use AC only rated tools with a DC power supply.
While the tool may appear to work, the electrical components
of the AC rated tool are likely to fail and create a hazard to the
operator.
Keep handles dry, clean and free from oil and grease. Slippery
hands cannot safely control the power tool.
Develop a periodic maintenance schedule for your tool.
When cleaning a tool be careful not to disassemble any
portion of the tool since internal wires may be misplaced
or pinched or safety guard return springs may be improp-
erly mounted. Certain cleaning agents such as gasoline, car-
bon tetrachloride, ammonia, etc. may damage plastic parts.
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other
masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how of-
ten you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with ap-
proved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
DESIGNATED DANGER ZONES
Avoid positioning hands, fingers or arms.

Additional Safety Rules

ber cement board. Cutting materials containing crystal-
line silica may create exposures to respirable silica dust.
WARNING
Wear Eye Protection
fore commencing power tool operation.
Lack of appropriate workpiece support may result in personal
injury.
A danger zone – never lift or carry saw by the main
-7-
Do
not
GCM18V-10SD miter saw to cut fi-
Before each use, review all warnings
located on the miter saw.
The operation of any power tool
can result in foreign objects
being thrown into the eyes,
which can result in severe eye
damage. Always wear safety
goggles that comply with ANSI
Z87.1 (shown on pack age) be-
Do not use this miter saw without
properly installed base extensions.
Do Not Carry the
Saw by this handle.
No lleve la sierra
por este mango.
Ne transportez pas la
scie par sa poignée.
DESIGNATED NO-CARRY AREA
switch handle.
use
the
Bosch

Advertisement

Table of Contents
loading

This manual is also suitable for:

Profactor gcm18v-10sd

Table of Contents