Unpacking And Checking Contents; Unpacking The Miter Saw; Checking Contents In Package - Bosch PROFACTOR GCM18V-10SDN14 Operating/Safety Instructions Manual

Unpacking the Miter Saw

To avoid severe pinching, never lift
or move this saw by gripping any
component of the mechanism support system.
When removing this tool from packaging materials, reach
down to the two side carry-handle locations and slowly lift
until it clears the package.
Fig. 4
Loose Parts
Torx Wrench (41)
2 Base Extensions (16)
4 Torx Screws for Base Extensions

Unpacking and Checking Contents

2 Workpiece Clamps (42)
-16-

Checking Contents in Package

Open the top of the package and look for the included loose
parts (Fig. 4).
Some small parts must be attached to the tool before it is
ready for use.
Check off each part.
Operating/Safety
Instructions
Dust Bag (36)
Miter Lock Knob (20)