Table of Contents
Advertisement
Features
2
Power/Ignition port
3
Power status light
4
Wireless LAN/Bluetooth status light
5
Cloud-connection status light
6
Ethernet port one (PoE)
7
USB 3.0 port
8
micro-SIM/SD card access door
The following figure shows the power connector pin number mapping.
shows the power connector pin definition details.
Table 4. Power connector pin definition details
Pin
1
2
3
NOTE: Pin 3 is connected to a vehicle's ignition status indicator (optional).
Right view
8
NOTE: A intrusion event is triggered by a third-party
enclosure to the Edge Gateway through a sensor. The
sensor should have a cable, which is compatible with
the intrusion switch connector on the Edge Gateway.
Connect a 12-57V DC power cable for supplying power to
the Edge Gateway.
NOTE: Power cable is sold separately.
Indicates the power status.
Indicates if WLAN/Bluetooth is ON or OFF.
Indicates the cloud connection status.
Connect an Ethernet (RJ45) cable for network access.
Provides data transfer speeds up to 10/100 Mbps. Also
supports Power over Ethernet (IEEE 802.3af compliant
PSE3.0).
Connect a USB enablight device. Provides data transfer
speeds up to 5 Gbps.
Insert a micro-SIM and/or SD card.
Signal
Power
GND
IGN
The following table
Function
12–57 VDC power
Ground
9–37 VDC ignition
Advertisement
Table of Contents
