Additional Programmes; Service Programme - Miele PLW 8616 Operating Instructions Manual

Areas of application

Additional programmes

Programme Area of application
Disin 93/10 - Programme for cleaning and thermal disinfection at 93 °C and
10 min holding time in the first programme phase; wash water
is only pumped out after the disinfection process
- In 2 power levels
Rinse cold wa- - Programme for rinsing the load items with cold water, e.g. to
ter remove:
- Heavy soiling
- Disinfectant residue
or
- To prevent soiling from drying and becoming encrusted on the
load items before the start of a reprocessing programme
Rinse demin. - Programme for rinsing the load items with demineralised wa-
water ter, e.g. to remove:
- Heavy soiling
- Disinfectant residue
or
- To prevent soiling from drying and becoming encrusted on the
load items before the start of a reprocessing programme
Drying - Programme for drying temperature-stable load items
- Not suitable for heat-sensitive load items

Service programme

Programme Area of application
Empty tank Programme for emptying the tank, e.g. for long downtimes; the
wash chamber must be empty
Manual disin- Programme for emptying the wash chamber when the wash wa-
fection ter needs to be decontaminated in the event of a programme
cancellation by adding disinfectant (see "Operation, programme
cancellation")
1) Subject to the settings of the parameter
Demineralised water tank
(see "System, water inlet machine configuration" in the programming handbook).
40
Standby
, the tank is automatically refilled after the end of the programme
1)
in the web interface under
Mobile
units
A 503
A 503
A 503
A 503
Mobile
units
Zero
A 503
Water intake/