Cleaning The Spray Arms - Miele PLW 8616 Operating Instructions Manual

Maintenance
78
Remove the microfine screen filter.

Remove deposits and soiling with running water, using a brush if

necessary.
Blast the microfine screen filter with compressed air against the dir-

ection of flow of the wash water.
Insert the microfine screen filter back into the sump.

Place the coarse filter on the microfine screen filter.

Push the holder through the opening in the coarse filter and turn it

to the right.

Cleaning the spray arms

Waste particles can lodge in the spray arm nozzles.
It is therefore important to inspect the spray arms regularly.
The spray arms of the machine, some mobile units and modules are
labelled as follows:
- M1 = Bottom machine spray arm
- M2 = Top machine spray arm
- A1 = A 501, A 504 mobile unit spray arms
- A2 = A 603 module spray arm
Note the label on the spray arms when you reinsert these into the
machine, mobile units and modules.
Use a sharp pointed object to push visible particles into the spray

arm nozzles and rinse well under running water.