Delay Start - Miele PLW 8616 Operating Instructions Manual

Operation
Programme can-
cellation due to a
fault
Manual disinfection
54
If the programme is cancelled during the first programme phase due
to a fault, the wash water will not be drained away. The necessary ac-
tions to be taken in such cases are described under "Manual disin-
fection".
Acknowledge the error message in the list with OK.

Acknowledge the programme cancellation with OK.

Please unload
The message
display.
Open the door on the infeed side.

Decontaminate the wash water by adding the disinfectant.

Close the infeed side door.

Select the load carrier.

Select and start the programme

programmes associated with the load carrier.
The wash water is pumped out and another error message is dis-
played.
Acknowledge the error message in the list with OK.

The door of the infeed side can be opened.

Delay start

The start of a programme can be delayed, for example, to benefit
from economy rates of electricity at night. The delay start period can
be set to the exact minute.
If soiling is left to dry on the load for longer, the reprocessing result
can be adversely affected. There is also a higher risk of corrosion
for stainless-steel load items.
To configure a delay start, select the  button in the footer.

Start time
Enter the

confirm.
The reprocessing programme starts automatically at the set time.
The automatic programme start can be cancelled at any time. To do
this, press the  button in the footer. A confirmation prompt is dis-
Cancel delay start?
played: .
confirmed, the reprocessing programme can be started manually.
is shown in the programme sequence
Manual disinfection
with the on-screen keyboard and press OK to
Once the confirmation prompt has been
from the list of