Pair The Earpieces With Another Bluetooth Device - Philips TAT1138BK/97 User Manual

The following example shows you
how to pair the earpieces with your
Bluetooth device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAT1138.
2
Enter the earpieces' password "0000"
(4 zeros) if prompted. For those
devices featuring Bluetooth 3.0 or
higher, there is no need to enter a
password.
Single earpiece (Mono mode)
Take either right or left earpiece out
from charging case for Mono use. The
earpiece will power on automatically.
Note
 Voice assistant is disabled in Mono mode.
 Take the second earpiece from the charging case
and they will pair with each other automatically.
Philips TAT1138
Pair the earpieces with
another Bluetooth device
If you want to pair another Bluetooth
device with the earpieces, just press and
hold MFB on both earpieces 5 seconds
into pairing mode and put back in the
charging case, then re-take out from the
charging case, discover the second device
as per normal pairing.
Note
 The earpieces store 4 devices in the memory.
If you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
05"
7 EN