Motorola oC81 Series Service Manual page 22

Disassembly
22
2. Using the flat end of the disassembly tool, remove the 2 housing screw plugs
(Figure 22, "Exploded view diagram," on page 41, Item 21).
3. Using a Torx driver with a T-6 bit, remove the 4 screws from the rear housing.
See Figure 8A.
4. With the flat end of the disassembly tool, carefully press the 4 housing catches
inward to release the rear housing. See Figure 8B.
Figure 8. Removing the rear housing
5. Lift the rear housing away from the front housing as shown in Figure 8C.
6. To replace, align the housing catches then press the rear housing down until
the 4 housing catches engage. Press the housings together until the catches
snap into place.
7. Replace the 4 screws and tighten securely. Do not over tighten.
March 21, 2003
Product Family 0C81
SCREW, T-6,
4 PLACES
A
HOUSING CATCH,
4 PLACES
B
REAR HOUSING
C
FRONT HOUSING
011642-o
6809462A54