Checking The Fluid Levels; Product Overview; Controls - Toro Groundsmaster 360 Operator's Manual

4

Checking the Fluid Levels

No Parts Required
Procedure
1. Check the hydraulic fluid level before starting the
engine, refer to Checking the Hydraulic Fluid Level in
the Maintenance Section.
2. Check the engine oil level before starting the engine,
refer to Checking the Engine Oil Level in the
Maintenance Section.
3. Check the cooling system before starting the
engine; refer to Checking the Cooling System in the
Maintenance Section.

Product Overview

Controls

Become familiar with all the controls before you start the
engine and operate the machine.
Traction Pedal
The traction pedal (Figure
operation. Press the top of the pedal to move forward and the
bottom to move rearward. Ground speed depends on how
far you press the pedal. For no load, maximum ground speed,
fully press the pedal while the throttle is in the Fast position.
To stop, reduce foot pressure on the traction pedal and allow
it to return to the center position.
Note: For emergency stops, press the rear of the traction
pedal (reverse) to stop the machine quickly.
1. Parking brake
2. Brake pedal
3. Tilt steering pedal
Speed Limiter
The speed limiter lever
limit the traction speed while operating.
Brake Pedal
The brake pedal is used in conjunction with the brake pedal
latch to engage and disengage the parking brake
stop the machine, release the traction pedal and allow it to
return to the center position. The brake can assist in stopping
in an emergency situation.
14
5) controls the forward and reverse
Figure 5
4. Traction pedal
5. Speed limiter
(Figure 5) can be flipped forward to
(Figure 5) To