Cleaning And Care - Silvercrest 281974 Operating Instructions Manual

NOTE ON THE SHAVING FOIL
► If the shaving foil is damaged, do not use it any more!
― To replace the shaving foil, remove the micro shaver
element
the micro shaver
― Use a slender object to push the shaving foil downwards on the short side
so that it is pushed out of the catch.
― Remove the defective foil.
― Push the new shaving foil carefully from below into the shaving foil holder
so that it clicks into place on the catch.
► To order replacement parts, please contact the service department (see chapter
Service). Please have the IAN number ready (see operating manual cover).

Cleaning and care

RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains adapter
mains adapter
CAUTION – PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use, clean the attachment used with the supplied cleaning brush
remove loose hairs.
■ Disinfect the attachment used regularly by spraying and cleaning it with disinfectant
spray.
■ To clean the epilator head
Clean the epilator head
■ To clean the micro shaver
Pull the coloured part from the base of the attachment and then carefully clean the
cutting blades that have now been revealed using the supplied cleaning brush
Then put the two parts of the micro shaver
■ If used regularly, the precision trimmer
occasionally. Use the supplied oil
attachment back and forth to ensure that the oil is evenly distributed.
■ Wipe the appliance, the trimming templates
a moist cloth. If required, use some mild detergent on the cloth. Ensure that the
appliance is completely dry before the next use.
SBT 3.6 C1
. Pull the coloured part (shaving foil holder) off the base of
.
from the power supply.
thoroughly, remove it from the hand element
under running water and then allow it to dry.
thoroughly, remove it from the hand element
. Add a drop of oil
back together.
and the micro trimmer
to the blade and tilt the
and the power adapter
GB │ MT
from the hand
and the
to
.
.
.
should be oiled
with
│
67 ■