Cleaning And Care; Storage - Silvercrest SBT 3.6 D2 Operating Instructions Manual

Cleaning and care

RISK OF ELECTRIC SHOCK
► Before cleaning, disconnect the appliance from the mains adapter
mains adapter
CAUTION – PROPERTY DAMAGE!
► NEVER submerse the appliance in water or other liquids!
■ After every use, clean the attachment used with the supplied cleaning brush
remove loose hairs.
■ Disinfect the attachment used regularly by spraying and cleaning it with disinfectant
spray.
■ To clean the epilator head
Clean the epilator head
■ To clean the micro shaver
Pull the coloured part from the base of the attachment and then carefully clean the
cutting blades that have now been revealed using the supplied cleaning brush
Then put the two parts of the micro shaver
■ If used regularly, the precision trimmer
occasionally. Use the supplied oil
attachment back and forth to ensure that the oil is evenly distributed.
■ Wipe the appliance, the trimming templates
a moist cloth. If required, use some mild detergent on the cloth. Ensure that the
appliance is completely dry before the next use.
NOTE
► To order replacement parts, please contact the service department (see chapter
Service). Please have the IAN number ready (see operating manual cover).

Storage

■ Always protect the micro shaver
■ Store the appliance, the attachments
the trimming templates
storage bag .
■ Store the appliance and all accessories in a dry and dust-free location.
SBT 3.6 D2
from the power supply.
thoroughly, remove it from the hand element
under running water and then allow it to dry.
thoroughly, remove it from the hand element
. Add a drop of oil
with the supplied protective cap
/ / / , the comb attachments
, the cleaning brush
back together.
and the micro trimmer
to the blade and tilt the
and the power adapter
and the mains adapter
GB │ IE │ NI
and the
to
.
.
.
should be oiled
with
.
and ,
in the
│
13 ■