Advertisement
INSTRUCTIONS
CONTROL PANEL
4
5
3
6
2
1
Other functions
1. "
" Mode button: long press the mode button for 3 seconds to connect to
2. "
+
"Combination button: long press the combination button for 3 seconds to reset settings to default.
(Default setting: the unit is in the unconnected state and unused state when leaving the factor）
3. "
+
"Combination button: long press the combination button for 3 seconds to unbind the device.
4. "
" light :
"
" light flashing : Waiting or in network conf iguration state.
"
" light on : Device connected to
"
Further explanations can be found in network connection instructions.
1
ON/OFF button
Power on/off
Total 12 fan speed setting. Press this button to rise the speed.
2
Speed button
1 – minimum speed; 12 – maximum speed.
• Auto mode Automatically adjust the fan speed according to
3
Mode button
• Sleep mode Adjust the fan speed to minimum.
• Turbo mode Adjust the fan speed to maximum.
Activate UV function, make use of UV light to have antibacterial
4
UV button
action in the air.
Light adjustment
Provide 3 sections of brightness selection of display screen.
5
button
Press this button to adjust brightness.
Use to select shut down time. After running the selected time,
6
Timer button
air purif ier will stop operating automatically. Timer is up to 12
hours in 2 hours increments.
.
10
:
air quality.
:
:
.
Advertisement
