Table of Contents
Advertisement
About this task
NOTE:
When removing the system board to replace/access other parts, the system board can be removed and installed
with the heat sink attached in order to simplify the procedure and preserve the thermal bond between the system board
and heat-sink. In order to do so, you must remove the two M2x3 screws securing the fan to the palm rest.
1. Fingerprint cable connector
2. Camera connector
3. eDP cable connector
4. SSD connector
5. Battery connector
6. Touchpad cable connector
7. LED cable connector
8. USH cable connector
9. P-sensor connector
10. WWAN connector
11. WLAN connector
12. Speaker cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
50
Removing and installing components
Advertisement
Table of Contents
