Table of Contents
Advertisement
Steps
Place the display back-cover on a flat surface and perform the following steps to install the display back cover.
Next steps
1. Install the
eDP
cable.
2. Install the camera.
3. Install the
display
panel.
4. Install the
display
hinges.
5. Install the
display
bezel.
6. Install the
display
assembly.
7. Install the
3-cell battery
8. Install the
base
cover.
9. Follow the procedure in
Sensor board
Removing the sensor board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
4. Remove the
display
assembly.
or
4-cell
battery.
after working inside your
before working inside your
or
4-cell
battery.
computer.
computer.
Removing and installing components
105
Advertisement
Table of Contents
