Steps
1. Connect the eDP/display cable to the connector on the camera.
2. Adhere the eDP/display cable to the display back cover.
3. Adhere the conductive tape and route the eDP/display cable to the display back cover.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
wireless
card.
5. Install the
base
cover.
6. Install the
microSD
card.
7. Follow the procedure in
Sensor board
Removing the sensor board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
84
Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.