Removing The Infrared Camera - Dell Precision 3470 Service Manual

Steps
1. Align and place the camera module into the slot on the display back cover.
2. Connect the camera cable to the connector on the camera module.
3. Adhere the tape to secure the camera cable in place.
Next steps
1. Install the display hinge.
2. Install the display panel.
3. Install the display bezel.
4. Install the display assembly.
5. Install the wireless card.
6. Install the base cover.
7. Install the microSD card.
8. Follow the procedure in

Removing the infrared camera

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the base cover.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the display bezel.
7. Remove the display panel.
About this task
The following images indicate the location of the infrared camera module and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components 79