Speakers; Removing The Speakers - Dell Precision 3470 Service Manual

Steps
1. Align the screw holes on the heat sink and fan assembly with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the four screws (M2x3) that secure the heat sink and fan
assembly to the system board.
3. Replace the two screws (M2x5) that secure the system fan to the frame.
4. Connect the system fan cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Install the microSD card.
3. Follow the procedure in

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the base cover.
4. Remove the battery.
5. Remove the assembly inner
About this task
The following image indicates the location of the speakers and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
card.
frame.
computer.
computer.
Removing and installing components 39