8. Remove the heat sink
9. Remove the
assembly inner
10. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
11. Remove the
power-button
12. Remove the
LED
board.
13. Remove the
smart card
14. Remove the
Keyboard
15. Remove the
display
assembly.
16. Remove the
dummy SIM-card slot
About this task
The following image indicates the palm-rest assembly and provides a visual representation of the removal procedure.
Steps
After performing the steps in the pre-requisites, we are left with the palm-rest assembly.
Installing the palm-rest assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the palm-rest assembly and provides a visual representation of the installation procedure.
96
Removing and installing components
heat
sink.
frame.
board.
reader.
assembly.
filler.