Installing the coin-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Steps
Adhere the coin-cell battery to the slot on the palm-rest assembly.
Next steps
1. Install the
assembly inner
2. Install the battery.
3. Install the
wireless
card.
4. Install the
2280 solid-state drive
5. Install the
base
cover.
6. Install the
microSD
card.
7. Follow the procedure in
Keyboard assembly
Removing the keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
frame.
or
2230 solid-state
After working inside your
Before working inside your
card.
drive.
computer.
computer.
Removing and installing components
55