About this task
The following image indicates the location of the display back cover and provides a visual representation of the installation
procedure.
Steps
Place the display back cover on a flat surface.
Next steps
1. Install the
display
hinge.
2. Install the
sensor
board.
3. Install the
eDP/display
4. Install the
camera
module.
5. Install the
display
panel.
6. Install the
display
bezel.
7. Install the
display
assembly.
8. Install the
wireless
card.
9. Install the
base
cover.
10. Install the
microSD
card.
11. Follow the procedure in
Dummy SIM-card slot filler
Removing the dummy SIM-card slot filler
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the
2280 solid-state drive
5. Remove the
memory
modules.
6. Remove the battery.
90
Removing and installing components
cable.
After working inside your
Before working inside your
card.
or
2230 solid-state
computer.
computer.
drive.