Installing the power button
About this task
The following image indicates the location of the power-button board and provide a visual representation of the installation
procedure.
Steps
1. Align and place the power-button board on the palm-rest assembly.
2. Replace the two (M2x2.5) screws that secure the power-button board to the palm-rest assembly.
NOTE:
This step applies to both models with and without the fingerprint reader.
Next steps
1. Install the
system
board.
2. Install the
heat
sink.
3. Install the
assembly inner
4. Install the battery.
5. Install the
memory
modules.
6. Install the
wireless
card.
7. Install the
2280 solid-state drive
8. Install the
base
cover.
9. Install the
microSD
card.
10. Follow the procedure in
frame.
or
2230 solid-state
After working inside your
drive.
computer.
Removing and installing components
51