Display Assembly; Removing The Display Assembly - Dell Precision 3470 Service Manual

Steps
1. Align and place the keyboard on the keyboard bracket.
2. Replace the five (M2x2) screws to secure the keyboard to the keyboard bracket.
Next steps
1. Install the keyboard assembly.
2. Install the system board.
3. Install the heat sink.
4. Install the assembly inner
5. Install the battery.
6. Install the memory modules.
7. Install the wireless card.
8. Install the 2280 solid-state drive
9. Install the base cover.
10. Install the microSD card.
11. Follow the procedure in

Display assembly

Removing the display assembly

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the base cover.
4. Remove the wireless card.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
frame.
or 2230 solid-state
After working inside your
Before working inside your
card.
drive.
computer.
computer.
Removing and installing components 61