System Board; Removing The System Board - Dell Precision 3470 Service Manual

Next steps
1. Install the assembly inner
2. Install the battery.
3. Install the base cover.
4. Install the microSD card.
5. Follow the procedure in

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the microSD
3. Remove the base cover.
4. Remove the 2280 solid-state drive
5. Remove the battery.
6. Remove the wireless card.
7. Remove the assembly inner
8. Remove the heat sink.
About this task
The following image indicates the connectors on your system board.
Figure 1. System board connectors
42 Removing and installing components
frame.
After working inside your
Before working inside your
card.
or 2230 solid-state
frame.
computer.
computer.
drive.