Next steps
1. Install the
assembly inner
2. Install the battery.
3. Install the
wireless
card.
4. Install the
2280 solid-state drive
5. Install the
base
cover.
6. Install the
microSD
card.
7. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
CAUTION:
Removing the coin-cell battery resets the BIOS setup program's settings to default. It is
recommended that you note the BIOS setup program's settings before removing the coin-cell battery.
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the
2280 solid-state drive
5. Remove the battery.
6. Remove the
wireless
card.
7. Remove the
assembly inner
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.
Steps
Pry and remove the coin-cell battery from the palm-rest assembly.
54
Removing and installing components
frame.
or
2230 solid-state
After working inside your
Before working inside your
card.
or
2230 solid-state
frame.
drive.
computer.
computer.
drive.