Next steps
1. Install the battery.
2. Install the
wireless
card.
3. Install the
base
cover.
4. Install the
microSD
card.
5. Follow the procedure in
LED board
Removing the LED board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the
2280 solid-state drive
5. Remove the battery.
6. Remove the
wireless
card.
7. Remove the
assembly inner
About this task
The following image indicates the location of the LED board and provides a visual representation of the removal procedure.
Steps
1. Disconnect the LED-board cable from the connector on the system board.
2. Peel the LED-board cable from the computer.
3. Remove the single screw (M2x3) that secures the LED board to the palm-rest assembly.
4. Lift the LED board and cable away from the palm-rest assembly.
After working inside your
Before working inside your
card.
or
2230 solid-state
frame.
computer.
computer.
drive.
Removing and installing components
35