Steps
1. Align and place the power button on the palm-rest assembly.
2. Replace the (M2x2) screw to secure the power button to the palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the fan.
3. Install the
WWAN card
4. Install the
WLAN
card.
5. Install the
3-cell battery
6. Install the
base
cover.
7. Follow the procedure in
Removing the power button with optional fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
4. Remove the
WLAN
card.
5. Remove the
WWAN card
58
Removing and installing components
(optional).
or
4-cell
battery.
after working inside your
before working inside your
or
4-cell
battery.
(optional).
computer.
computer.