Steps
1. Align and place the sensor board on the display back cover.
2. Connect the display cable to the connector on the sensor board and close the latch.
Next steps
1. Install the
display
panel.
2. Install the
display
bezel.
3. Install the
display
assembly.
4. Install the
3-cell battery
5. Install the
base
cover.
6. Follow the procedure in
LED board
Removing the LED board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
About this task
The following image indicates the location of the LED board and provides a visual representation of the removal procedure.
or
4-cell
battery.
after working inside your
before working inside your
or
4-cell
battery.
computer.
computer.
Removing and installing components
107