Special Functions; Description Of Special Functions; Toner Save Mode - Sharp AL-800 Operation Manual

4

SPECIAL FUNCTIONS

DESCRIPTION OF SPECIAL FUNCTIONS

This chapter describes the special functions of this copier.
Toner save mode (page 25)
Reduces toner consumption by approximately 10%.
Power save modes (page 26)
The copier has two power save modes of operation: preheat mode and auto power shut-off
mode.
Preheat mode
When the copier enters the preheat mode, the power save (
other indicators will remain on or off as before. In this condition, the fuser in the copier is
maintained at a lower heat level, thereby saving power. To copy from the preheat mode,
make desired copier selections and press the print (
procedure.
Auto power shut-off mode
When the copier enters the auto power shut-off mode, the power save (
light up and other indicators will go out. The auto power shut-off mode saves more power
than the preheat mode but requires a longer time before starting copying. To copy from the
auto power shut-off mode, press the print (
and press the print (
Auto clear (page 26)
The copier returns to the initial settings a preset amount of time after the last copy is made.
This preset amount of time (auto clear time) can be changed.

TONER SAVE MODE

When the machine is used as a computer printer (AL-840 only), the toner save
mode which is set as described below does not function. Set the toner save
mode using the printer driver. See the printer operation manual.
Press the exposure mode selector key to select the manual (
1
) key using the normal copying procedure.
) indicator will light up and
) key using the normal copying
) key. Then make desired copier selections
) indicator will
) mode.
25
4