Sharp AL-800 Operation Manual page 28

Press the print (
3
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
4
parameter number will blink on the right of the display.
Program
No.
1 Auto clear time
2 Preheat mode
3 Auto power shut-
off timer
5 Auto power shut-
off mode
9 Paper detection
mode
Factory default settings are indicated with an asterisk (*).
Paper detection mode
If the width of the paper in the paper tray is less than 8-1/2", the width of scanning
will be reduced to 5-1/2".
Press the print (
5
the entered value will be stored.
To change the setting or to set another mode, press the clear (
copier will return to step 2.
Press the light (
6
) key. The entered program number will be lit steadily and the
Mode
0 e OFF
3 e 90 sec.
0 e 30 sec.
0 e 2 min.
3 e 30 min.
0 e OFF
0 e OFF
) key. The right-hand number in the display will be lit steadily and
) or dark ( ) key to return to the normal copy mode.
USER PROGRAMS
) key. The entered
Parameters
1 e 30 sec. * 2 e 60 sec.
4 e 120 sec.
1 e 60 sec. * 2 e 90 sec.
* 1 e 5 min. 2 e 15 min.
4 e 60 min. 5 e 120 min.
* 1 e ON
* 1 e ON
) key. The
4
27