User Maintenance; Cabinet - Sharp AL-800 Operation Manual

Gently replace the TD cartridge. To install the TD cartridge, see page 12, INSTALLING
9
THE TD CARTRIDGE.
Turn on the copier power. While pressing and holding down both the exposure mode
10
selector key and clear (
keys for five seconds (drum initialization processing). The drum replacement required
( ) indicator will go out.

USER MAINTENANCE

Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to
regularly clean the copier.
Before cleaning, be sure to turn the power switch off and remove the power
cord from the outlet.
Do not use thinner, benzene or other volatile cleaning agents. Doing so may
cause deformation, discoloration, deterioration or malfunction.

Cabinet

Wipe the cabinet with a soft, clean cloth.
DRUM CARTRIDGE REPLACEMENT
) key , close the front cover. Continue to hold down these
ON LINE
5
31