Table of Contents
Advertisement
Frequently Asked Questions
Problem
Fill the bean container
pears in the display
even though the bean
container has just been
filled.
The coffee machine
does not rinse itself
when turned on.
Coffee dispensing is re-
peatedly interrupted
and the message
bean container
appears in
the display.
62
Possible cause and solution
ap-
This is not a fault.
Confirm the message with OK.
Insufficient coffee beans are getting into the grinder.
Have you used a dark roast?
This type of coffee bean is often oily. These oils can
cling to the inside of the coffee bean container and
hinder the flow of beans.
Make a coffee and observe whether the coffee
beans drop into the coffee bean container.
Clean the coffee bean container more often if you
are using a darker, more oily bean.
Try other types of coffee bean which are less oily.
This is not a fault.
If the coffee machine is already at operating
temperature, rinsing will not take place when the
appliance is switched on.
This is not a fault.
The brew unit has not detected the ground coffee.
Fill the
Certain types of coffee produce a small amount of
coffee when they are ground. Usually the grinder is
set too fine and the amount is set to minimum.
Confirm the message with OK.
If the coffee is too strong for you or tastes bitter, try a
different type of coffee bean.
If the display appears with all types of coffee:
Set the grinder to a coarser setting (see "Grinder
setting").
Select a larger amount of coffee.
Don't forget to check any drinks changed in "User
profiles".
If the message only appears when dispensing certain
drinks:
Check the amount of coffee set for this drink (see
"Amount of coffee"). Select a larger amount of
coffee.
You may also need to set a coarser grinder setting.
Advertisement
Table of Contents
