Table of Contents
Advertisement
Technical safety
Before installing the coffee system, check for externally visible
damage. If the coffee system is damaged, it may pose a safety
hazard and must not be used under any circumstances.
Before connecting the coffee system, check the voltage and
frequency indicated on the data plate against the voltage and
frequency of the household electrical supply.
This data must correspond in order to prevent damage to the coffee
system. If in doubt, consult a qualified electrician.
Be certain your appliance is properly installed and grounded by a
qualified technician. To guarantee the electrical safety of this
appliance, continuity must exist between the appliance and an
effective grounding system. It is imperative that this basic safety
requirement be met. If there is any doubt, have the electrical system
of the house checked by a qualified electrician.
Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronized
with the grid power supply (e.g., island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with national and local codes.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronized with the grid power supply, or these measures must be
replaced by equivalent measures in the installation.
Do not connect the machine to the electrical supply using an
extension cord or power bar.
The coffee machine may not be used in mobile installations such
as ships.
Unplug the coffee machine from the power supply immediately if
you notice any damage or smell burning.
IMPORTANT SAFETY INSTRUCTIONS
9
Advertisement
Table of Contents
