Installation And Adjustment Of Mirrors - Hitachi ZAXIS 120-6 class Operator's Manual

Installation and Adjustment of Mirrors

d
WARNING:
 Adjust the mirrors, referring to the field of vision in
the mirrors in the "VISIBILITY MAP" chapter.
Perform adjustment with the machine position as
shown.
 If the mirrors are adjusted improperly, the field of
vision cannot be ensured and/or will be obstructed,
which may result in serious personal injury.
 Check the field of vision in the mirrors every day
before starting work.
 If any of the mirrors are dirty, clean them.
 Ensure appropriate footing when adjusting or
cleaning mirrors.
IMPORTANT: Mirrors and cameras only act as aids. Before
operating the machine, always check the area around
the machine thoroughly.
IMPORTANT: If a modification is made that could restrict
the field of vision, it may result in an obstruction to the
field of vision, so check the field of vision again.
OPERATOR'S STATION
1-147
Machine Position Image
(Monoblock Boom)
MDC1-VM-001