Electric Grease Gun (Nickel-Cadmium Battery) (Only Zx330-6 Class) - Hitachi ZAXIS 120-6 class Operator's Manual

Electric Grease Gun (Nickel-Cadmium Battery)
(Only ZX330-6 class)
d
CAUTION:
 Since the electric grease gun is not a water-
resistance type, avoid leaving it in a place exposed to
rain and water. Do not use the electric grease gun in
rain fall. Failure to do so may lead to an unexpected
accident such as leak.
 No specified daily maintenance is required. Take care
not to allow any part of the grease gun, especially
motor section, to come in contact with other objects
or do not leave the grease gun contaminated,
possibly resulting in unexpected injury such as
electric shock.
 Always keep the grease gun clean by wiping off
contamination. Failure to do so may cause the grease
gun to slip down resulting in possible personal
injury.
d
WARNING:
 Do not operate an electric grease gun in explosive
atmosphere.
 An electric tool may create sparks and ignite
combustible fluid, dust, or fumes.
 Avoid electrifying the grease gun in damp or wet
locations.
 The high pressure of the grease gun is different for
each grease gun. Use goggles and heavy gloves for
protection during operation.
 Normal/Nickel-cadmium battery type: 41.4 MPa
(422 kgf/cm 2 )
 Lithium-ion battery type: 55.1 MPa (562 kgf/cm
IMPORTANT:
 In case the grease gun becomes inoperable, do
not continuously operate it further. Damage to the
motor or a risk of fire may result.
 When a battery pack is not in use, store the battery
pack keeping away from a metallic product such as
a paper clip, coin, key, nail, or screw. Short circuit of
the battery may create sparks leading to hazards
such as burns, or fires.
 Always be sure to use the attached battery pack.
Using a battery pack other than the attached one
may cause a risk of fire.
 Supply the power to the battery charger through the
lighter receptacle with the output of 12 V or 24 V.
MAINTENANCE
)
2
7-35