Bucket Types And Applications; Specifications - Hitachi ZAXIS 120-6 class Operator's Manual

Bucket Types and Applications

ZX250LC-6
Bucket
Hoe Bucket
Bucket reinforcement can be
welded in four places upon
customer' s request
Reinforced Hoe Bucket (HD
Type)
Reinforced Hoe Bucket HD Type
(Transverse-Type-Pin-Used Type)
Rock Bucket
Ripper Bucket
One Point Ripper
Clamshell Bucket
f
NOTE:
 Symbols in the above table have the following meanings.
 : General excavating
 : Light duty excavating
 : Rock digging
 : Loading work
 : Slope-finishing work
- : Not applicable (not warrantable)
 Hoe bucket is applicable to the following types of work.
General excavating:
For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
Light duty excavating:
For digging and loading operation of dry, loosened earth, sand, mud and so on.
Their bulk density shall be less than 1.60 t/m
Loading:
For loading operation of dry, loosened earth and sand.
Their bulk density shall be less than 1.10 t/m
Rock digging:
For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.

SPECIFICATIONS

Bucket Capacity
m
3
PCSA CECE
(Heaped) (Heaped)
0.80 0.70
1.00 0.90
1.10 1.00
1.25 1.10
1.40 1.20
1.00 0.90
1.10 1.00
1.00 0.90
1.00 0.90
0.92 0.80
0.80 0.70
-
0.80
as a standard.
3
as a standard.
3
12-16
Bucket Width
mm
Application
(With side
cutter)
1080
1260
1350
1490
1630
1260
1350
1270
1270
1180
1000
(Without side
cutter)
-
Bucket width
Side ditching
870
Front-End Attachment
2.96 m 3.61 m
Standard Arm Arm
 
 
 
 
- -
 
 
 
 
-

-

-

-
