Table of Contents
Advertisement
The icon (
Creating Recovery CD
1.
Connect the AC adapter to the computer.
Be sure to connect the AC adapter. If the battery is completely
discharged, the burning CD process will be stopped.
2.
Insert a blank CD-R into the optical drive.
If a dialog box or window appears, close it.
3.
Click start – All Programs – Create Product Recovery CD.
4.
In the Bootable CD Creator SE1.1 window, select the appropriate speed from the
speed pull-down menu, then, click Create Recovery Disc.
5.
Read the message on the screen and then, click Yes, then, OK. The burning
process will start.
Never touch the keyboard, the mouse or the screen during burning
process except when the message prompts you to. If you touch them, the
burning process may be stopped.
6.
Replace the CD-R by following the instructions on the screen. Assign names to
each CD-R in the order of burning so that you will set them in correct order when
using them.
If a window or dialog box opens, close it.
7.
When you see the message Disc creation complete on the screen, click OK, then,
Close.
8.
Click Yes and remove the CD-R from the optical drive.
) will change to (
).
A-21
Advertisement
Table of Contents
