Table of Contents
Advertisement
• When you run WinDVD for the first time, you need to enter the serial
number on the bottom of the computer.
• Before watching DVD videos, follow the instructions below:
• Connect the AC adapter. If the battery is discharged, the operation
• Disable the power management. See the Power Management of
1
• Close all of the unnecessary or the automatic start-up applications.
• Disable the screen saver. (Refer to the Changing Wallpaper and
• When playing a DVD video, you may experience a picture with an
irregular motion, or frame dropouts, depending on videos.
Make sure to remove the DVD video from the drive when you finish
watching it. If you turn off the computer with the disc left in the drive, the
drive may not be recognized when the computer is turned on again.
Changing Region Code
A DVD video has a region code which prevents playback of the disc in certain
regions. The region code appears on the top of the disc.
When shipped from the factory, your optical drive is set to a region code applicable to
your area.
Your DVD drive region code can be changed. Code change is limited.
Once the limit is reached, it cannot be changed any more.
To confirm the limit, click Region tab of Setup dialog box and check the
bottom line in the window. (Refer to the Using Parental Control section on
the next page to open the Setup dialog box.)
Make sure to log on the computer as a member of the Computer
administrators group. Otherwise you cannot change the region code.
Available region codes are:
Region Code
1
2
3
4
5
6
1-14
will stop.
Chapter 2.
Setting Screen Saver section later in this chapter.)
Area
U.S.A, Canada
West Europe, Japan, South Africa
South East Asia (including Hong Kong)
Australia, Spanish America
Former Soviet Union, Indian Subcontinent, Africa
China
Advertisement
Table of Contents
