Table of Contents
Advertisement
LAN Unit
You can connect to a LAN (Local Area Network) with the 100 Base-TX/10 Base-T
LAN units on the computer. To activate the LAN unit, perform the following steps.
Never insert any cables, but a LAN cable, which have different electric
characteristics from those of the LAN cable. Otherwise, the LAN unit and
the cables may be damaged.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 only when connecting to 100 BASE-TX
LAN.
Connecting Your Computer to LAN
1.
Turn off the computer.
2.
Open the cover for the LAN jack on the left side of the computer.
4
Do not insert the modem cable into the LAN jack It may damage the
modem cable and the LAN jack.
To avoid damaging the LAN unit, close the cover after you finish using
the LAN unit.
4-4
Cover
Advertisement
Table of Contents
