Toro Greensmaster 3150 Operator's Manual page 17

Functional Control Lever
The functional control lever
traction selections plus a N
shift from mow to transport or transport to mow (not
to neutral) while the machine is in motion; no damage
will result.
•
R position—neutral position; use when
EAR
backlapping the reels
•
M position—use when cutting grass
IDDLE
•
F position—use when driving the machine
RONT
between job sites
Ignition Switch
Insert the key into the switch
clockwise to the S
TART
Release the key as soon as the engine starts;
the key moves to the O
counterclockwise to the S
engine.
Steering-Wheel Locking Lever
Rotate the lever (Figure
adjustment, raise or lower steering wheel for your
comfort, then, rotate the lever rearward to tighten the
adjustment.
Figure 18
1. Steering-wheel locking lever
Steering-Arm Locking Knob
Loosen the knob (Figure
knob clears the notches in the steering arm. Raise
or lower the steering arm to the desired height while
aligning the shoulder of the knob with the notch in the
steering arm. Tighten the knob to lock the adjustment.
(Figure 17) provides 2
position. You can
EUTRAL
(Figure 17) and turn it
position to start the engine.
position. Turn the key
N
position to shut off the
TOP
18) forward to loosen the
19) until the shoulder on the
1. Steering-arm locking knob
Fuel-Shutoff Valve
Close the fuel-shutoff valve
tank, when storing or transporting the machine on a
truck or trailer.
1. Fuel-shutoff (under the fuel tank)
Backlap Lever
Use the backlap lever
mow control lever and the reel speed control for
backlapping the reels.
g005505
1. Backup lever
Reel-Speed Control
Use the reel-speed control
speed of the reels.
17
Figure 19
(Figure 20), under the fuel
Figure 20
(Figure 21) with the raise/lower
Figure 21
2. Reel-speed control
(Figure 21) to adjust the
g032583
g005109
g007385