Programmes In Detail - Silvercrest 90090 Operating Instructions Manual

Programmes in detail

Programme 1: Beverages
This programme runs only with utilisation of micro-
wave power. Subject to the number of portions, the
programme runs for between 1:30 and 3:50 minutes.
• Place the beverage that you wish to heat up on
the glass plate 3 in the cooking area. If you
wish to place several glasses or cups in the mi-
crowave oven, ensure that the receptacles do
not touch each other.
Notice!
To avoid sudden simmering:
• If possible, place a glass rod in the fluid for as
long as it is being heated.
• To avoid an unexpected reboiling, leave the
fluid to stand in the microwave oven for ca. 20
seconds after being warmed up.
Programme 2: Noodles
This programme runs only with utilisation of micro-
wave power.
Subject to the weight programmed in, this programme
runs for between 25 and 35 minutes.
• When cooking noodles use a tall container, as
there is a great risk of it boiling over.
• Use as much water as you would in conventional
cooking. The noodles should "swim" in the water.
• First bring the the water to the boil: Set the micro-
wave to its highest performance level (P800)
and then start it. For a liter of water you need
about 10 minutes to bring the water to the boil.
• Then add the noodles. After this, you can start
the auto-menu for noodles.
• Finally, allow the noodles to stand for approx. 3 mi-
nutes.
Programmme 3: Fish
This programme runs only with utilisation of micro-
wave power.
Subject to the weight programmed in, this programme
runs for between approx 3:30 and 16 minutes.
• Lay the pieces of fish on a plate suitable for
microwave ovens, add a little butter or an other
fat, add flavouring to taste and then start the
auto-menu for fish.
Programmme 4: Rice
This programme runs only with utilisation of micro-
wave power.
Subject to the weight programmed in, this programme
runs for between 16 and 36 minutes.
• When cooking rice use a tall container, as there
is a great risk of it boiling over. Use 400 ml water
for, for example, 200 g of rice. Use the weight
adjustment "200 g" despite the water. It is al-
ways the weight of the rice that is to be set.
• Place the rice in the container, fill it with the re-
quired volume of liquids and then allow the rice
to swell for approx 3 minutes.
• Cover the container. Ensure that it is not sealed
airtight. After this, you can start the auto-menu
for rice.
- 16 -