Maintenance
Note:
Determine the left and right sides of the
machine from the normal operating position.
Disassembling the Reel
Disassemble the reel whenever you need to change a
blade or replace the reel bearings.
Important:
Ensure that the 2 shaft retainers and
spacer are in place before installing the bearing
on the reel
(Figure
6). Torque the insert nuts to
136 N∙m (100 ft-lb).
1. Left-hand threaded insert
nut
2. Bearing
3. Seal
Figure 6
4. Spacer
5. Slot in shaft
6. Shaft retainer (install these
first)
g016597
8