Maintenance
Inspecting and Cleaning
the Rake and Traction Unit
After raking, clean the machine thoroughly. Because
you use this machine primarily in sand and sand is
extremely abrasive, wash off the sand after each use.
If you clean the machine frequently (before the sand
has a chance to cake), clean it with a stream of water
from a hose with the nozzle removed. A high-pressure
stream could drive the sand into wear areas, where it
could act as a grinding compound.
Note:
If the attachment adapter sticks to the traction
unit adapter, insert a pry bar or screwdriver into the
pry slot to disengage the parts
Figure 16
1. Pry slot
(Figure
16).
g003783
Greasing the Attachment
Adapter
If the locking lever on the attachment adapter does
not pivot freely and easily, apply a light coat of grease
to the area shown in
11
Figure
17.
Figure 17
g220788