Motor Rotation - Pioneer V050-PPI-01 Owner's Manual

INSTALLATION
Electrical Installation

Motor Rotation

Always make sure the motor is not spinning backwards. Refer to
reverse the motor's rotation via the SmartPrime screen.
To reverse motor rotation without the HMI:
1. Turn off power to the ElectricPAK™ VFD.
2. Unplug two of the three power cables and plug them into the opposite camlock connection.
IMPORTANT: Do not swap the ground cable.
3. Turn power back on to the ElectricPAK™ VFD.
4. Start package and double check rotation.
10
"Manual Control Buttons" on page 22 to