Manual Control Buttons; Speed Control Source - Pioneer V050-PPI-01 Owner's Manual

OPERATION
Manual Mode

Manual Control Buttons

1 2
STOP button: stops the pump from running.
1.
2. START button: starts the pump.
3. FWD/REV button: Changes the motor rotation. Pressing this button will trigger a confirmation dialog
box.
• Press YES to change motor direction.
• Press NO to keep the current motor rotation.
NOTE: If the pump is already running and FWD/REV is pressed and confirmed YES, the pump will slow
down to a stop, change direction, restart, and resume operating at the current speed setting.
4. Status Light/Indicator: shows pump status.
• STOPPED (red): Indicates the pump is stopped.
• RUNNING (solid green): Indicates the pump is running.
• DECELERATING (flashing green): Indicates the pump is decelerating.

Speed Control Source

1
1. Control Source drop-down: Chooses whether the pump speed will be controlled by the dial or the
touch screen.
• Door Mounted Dial: The speed is controlled via the speed potentiometer mounted on the front of the
enclosure.
• Touch Screen: The speed is controlled via the touch screen. When selected, the other buttons appear.
2. Accelerate button: Press the green rabbit to increase speed by 1 Hz.
3. Decelerate button: Press the red turtle will decrease speed by 1 Hz.
4. Type Speed Input Box: Press to manually enter Hz.
NOTE: Speed settings will be limited to the min and max speed settings in the Settings screen. Default is
30 Hz minimum and 60 Hz maximum.
22
3
4
2
3
4