Table of Contents
Advertisement
Configuration Options via Command Line (Cont.)
View HCS6320 System Information
1. Access the HCS6320 Main Menu as described on the previous page.
[Main] Command > prompt, type info and press Enter to display HCS6320 hard-
2. At the
ware and software information.
The System Information display contains important information about the HCS6320, including
the unit hardware ID (firmware version), software versions, IP address, MAC address, and
serial number, for example:
System Information
------------------
Model:
Hardware ID:
OS version:
Application version: 2.5
IP address:
MAC address:
Serial#:
It is recommended that you record this information for future reference. If you find it necessary
to call customer service or engineering support, please have this information available.
Set HCS6320 RF Channels
1. Access the HCS6320 Main Menu as described on the previous page.
[Main] Command > prompt, type rf and press Enter.
2. At the
Enter the start channel number [2 - 132] > prompt, type the appropriate
3. At the
start channel number and press Enter.
The remaining channels will be automatically assigned per EIA-542 STD CATV frequency
allocation standards, and the system will display the channel assignments (i.e., the Channel
Map) for the card slots (see example under "Print the RF Channels Map" below).
Print the RF Channels Map
1. Access the HCS6320 Main Menu as described on the previous page.
[Main] Command > prompt, type mrf and press Enter to display the current
2. At the
Channel Map, for example:
Channel Map:
--------+-----------
Cards
| RF Channel
--------+-----------
1,
2 |
2
4,
5 |
3
8,
9 |
4
11, 12 |
5
--------+-----------
206-4183
HCS6320
6320-v1.0-2011-1101
HCS6320-1102-2011-1031
10.166.60.81
00:0C:63:3C:00:02
901-12420020
Get other manuals https://www.bkmanuals.com
31
Advertisement
Table of Contents
